Be eco-friendly and give your contribution through your acts not words and never let your phone battery empty, show others how it’s done.

 

Specifications:

(1) Solar panel: 5-5.5V 0.6W,monocrystalline silicon.

(2) Capacity of polymer battery: 5200mAh can be used circularly for 500 times solar power bank window charger

(3) Micro USB Input/Output: 5V 1A

(4) Material: Enviroment friendly ABS

(5) Time of charging itself fully by sunlight: 15-20 hours by strong sunshine

(6) Time of charging itself fully by USB cable: 6-8 hours

(7) Time of charging mobile phones: about 3 hours.

8) The led indictor is red under charging status;and turns off when solar charger was fully charged

(9 )When it charges other devices the led indicator is green and turns off when there is no electric in the battery.

(10) There are suction around this solar charger which enables it to be sucked into the window of the glass or your home.

(11) Can be applicable to iPhone, other mobilephones, iPod, Mp3/4, digital camera etc; with the full powered battery.

(12) Adopt intelligent chip,support overcharge/discharge/overload and shortcircuit protection.

(13) When put in the glass window, make sure the glass with no dust.

(14) A little wet can strengthen the cohesive force;using the wet towel to clean the glass.

 

Features:
(1) 0.6w Solar Panel Even if there were no electricity, it also can charge for mobile phone with solar power.

(2) Adopt Intelligent Chip Support overcharge / discharge / overload and short-circuit protection.

(3) Unique Adsorption Function It can stick on glass window to charge for mobile phone.

(4) Rubber oil surface Smooth rubber oil surface can make you don’t leave fingerprint.

 

 

Time:

(1) Time of charging itself fully by USB cable: 3~4hours (5~6 hours for the first time).

(2) Time of charging itself fully by sunlight: 8~10hours.

(3) Time of charging mobile phones: about 3 hours.

Pilot Light:

 

(1) Charging for itself: The led pilot light is red under charging status;and when solar charger was fully charged, it turns off.

(2) Charging for other products: When it charges for other devices, the led pilot light is green; and When other equipment is on a full charge, it will cut off power supply automatically and the light turns off.

 

How to use:

Way 1: Stick on a window to charge

1. Take it out from the package box, install suckers.

3. Connect your phone (or other USB device) with charger by a data cable. ( Notice: Our USB data line accessories are used for charging the charger.)

4. Put the charger on the window to charge.

 

Way 2: Charge Directly

1. Take it out from the package box.

2. Connect your phone (or another USB device) with charger by a data cable.

 

Tips:

1. When you first time use the solar charger, please use the USB way to charge for the internal battery.

2. When Charging for mobile phones or other digital products, please ensure products is full of electricity.

3. When putting it posted on the windows, please make sure there is no dust on the glass.

4. Use a wet towel to wipe the glass can enhance the viscosity of suckers when you want to put it on the window.

5. When the mobile power bank is charged in the sunlight, the charging time and effect is different due to different sunshine intensity and the refraction angle of sunshine.